Balancers

Balancers 

pH Up - 5lbs

$ 10.95 USD

Increases pH in pools and Hot Tubs. 

Directions: Use 1lb per 10,000 gallons of water to properly adjust pH.

 

pH Up - 16lbs

$ 29.98 USD

pH Up is used to raise pH readings in pools and hot tubs. 

Use 1 lb per 10,000 gallons of water to raise pH readings. 

 

pH Down - 6 lbs

$ 14.95 USD

pH Down reduces pH readings and total alkalinity in your swimming pool or hot tub. 

Use 1 lb per 10,000 gallons acroos the pool or spa to reduce pH. 

Use 1lb per 10,000 gallons in one spot to reduce alkalinity. 

 

pH Down - 10lbs

$ 22.95 USD

pH down lowers pH and alkalinity readings in your swimming pool or hot tub. 

Use 1 lb per 10,000 gallons spread across the pool to lower pH

Use 1lb per 10,000 gallons in one spot to lower alkalinity. 

 

Alkalinity Increaser - 5lbs

$ 10.95 USD

Alkalinity is the resistence of pH. If your alkalinity is low, your pH readings can bounce back and forth constantly, costing a fortune in pH up or down and throwing your pool chemistry off. 

Adding alkalinty increaser to bring your reading to idea alkalinity level keeps this pH jump from happening, maintaining a steady pH and therefore allowing your other chemicals to work right.  

 

Alkalinity Increaser - 25lbs

$ 38.00 USD

Alkalinity is the resistence of pH. If your alkalinity is low, your pH readings can bounce back and forth constantly, costing a fortune in pH up or down and throwing your pool chemistry off. 

Adding alkalinty increaser to bring your reading to idea alkalinity level keeps this pH jump from happening, maintaining a steady pH and therefore allowing your other chemicals to work right. 

 

Calcium Increaser - 5lbs

$ 11 USD

Low Calcium levels will cause long-term serious damage especially to plaster, vinyl liners, grout in between tiles, metal rails, and even concrete decking around the pool as well as create staining throughout the pool

Add chemical when needed to maintain acceptable calcium levels in your pool. 

 

Calcium Increaser - 25lbs

$ 39.95 USD

Low Calcium levels will cause long-term serious damage especially to plaster, vinyl liners, grout in between tiles, metal rails, and even concrete decking around the pool as well as create staining throughout the pool

Add chemical when needed to maintain acceptable calcium levels in your pool. 

 

Chlorine Stabilizer - Conditioner - 8lb

$ 35.95 USD

Cut Chlorine consumption by up to 80%!

Stabilizer helps to prevent loss of chlorine residual in your swimming pool from the sun's UV rays. 

Add as needed to maintain good chlorine levels.

1lb treats 3,000 gallons of water

Active Ingredient: Cyanuric Acid

 

Chlorine Stabilizer & Conditioner - 4lbs

$ 16.95 USD

Cut Chlorine consumption by up to 80%!

Stabilizer helps to prevent loss of chlorine residual in your swimming pool from the sun's UV rays. 

Add as needed to maintain good chlorine levels.

1lb treats 3,000 gallons of water

Active Ingredient: Cyanuric Acid

 

Natural Chemistry Instant Conditioner - Liquid Stabilizer

$ 27.95 USD

Super fast - Super easy!

Instant dilution for ease and quickness of pool balancing. Normal conditioner can take up to 4 to 6 days to fully dissolve. 

Shake well before using. 1 Gallon raises stabilizer readings from 0 to 32 in a 10,000 pool. 

*Active Ingredient: cyanuric acid

 

Muriatic Acid - 1 Gallon

$ 6.98 USD

Muriatic Acid is widely used in saltwater pools and chlorine pools to lower pH and also to clean salt cells in saltwater pools.

Another popular use for muriatic acid is in acid washing gunite pool finishes. 

Keep away from eyes, nose, and contact with the skin.

Store in cool, dry area.

 

 

Muriatic Acid - 4 pack Case

$ 21.95 USD

Muriatic Acid is widely used in saltwater pools and chlorine pools to lower pH and also to clean salt cells in saltwater pools.

Another popular use for muriatic acid is in acid washing gunite pool finishes. 

Keep away from eyes, nose, and contact with the skin.

Store in cool, dry area.